|
 |
|
FREEDOM SWITCHTM WIRELESS CONTROL
Superwinch's new Freedom Switch(tm) Wireless Remote Control systems enable
wireless winch operation from up to 150 feet away. Designed to work with any 12 volt
solenoid-switched Superwinch winch model or Power Drive, these systems are designed for quick installation and easy wireless operation. Choose from four separate systems, each complete with instructions. All are FCC and IC approved.
 |
 |
 Wireless Utility Winch System
Long sought after by trailer owners, this is the easiest to install and use -
simply plug the connector into your current remote control socket and you're ready to go. No additional power source is needed. There are two kits available: PN 06302 is for Superwinch models with a 4-pin plug and PN 06702 for Superwinch models with a 7-pin plug. (See picture below) Unique to Superwinch is a separate control module with power ON and OFF and a secondary manual winch control switch for additional winch operation capability. Both kits come complete with two wireless remote transmitters, antenna, harness with plug, control module, hardware and owner's manual.
|
|
|
PN 06302 For use with 4-Pin Handheld Remotes
PN 06702 For use with 7-Pin Handheld Remotes
|
 
|
|
06702
|
 Fits Superwinch solenoid models with a 7-Pin Connector
Contains:
• Utility Winch Wireless Control
• Antenna
• Two Remote Transmitters
• Winch Wire Harness and Hardware Kit
|
|
06302
|
 Fits Superwinch solenoid models with a 4-Pin Connector
Contains:
• Utility Winch Wireless Control
• Antenna
• Two Remote Transmitters
• Winch Wire Harness and Hardware Kit
|
|
 ATV Wireless Winch Control System
No longer do you need to be on or near your ATV to winch it out of
that swamp! Superwinch's new ATV Wireless Winch Control System for ATVs is easy to install with color-coded wiring and plug-and-play connections. Each component is sealed to ensure operation in the worst ATV environment. Each kit comes complete with two wireless remote transmitters, antenna, power distribution module, all wiring, hardware and an owner's manual.
|
|
|
|
|
PN 06212 - For use with ATV1800, ATV2300, ATV2500, ATV3000 and UTV4000
|
|
• Instant "ON" and "OFF" for immediate control, no delay
• Signal recognition up to 150 feet
• Compact shielded antenna designed for easy remote mounting
• Plug and play components ensure quick installation
• Sealed tough and tight for all conditions
|
|
 |
|
06212
|
Fits Superwinch ATV1800, ATV2300, ATV2500, ATV300 and UTV4000
Contains:
• Power Distribution Module
• Antenna
• Two Remote Transmitters
• All Wiring and Hardware
|
|
|
|
Wireless Power Drive System
|
|
|
Superwinch's new Wireless Power Drive system is designed for the most rugged of environments. Featuring a sealed control box, vibration tested to over-the-road vehicle standards, it can withstand most any weather condition and operating environment. A separate manual control switch provides secondary operation capability. Connect to power and the motor and you're ready to go. Includes Power Drive Control Box, two wireless remote transmitters, wireboot covers, and owner's manual.
|
 |
 
|
|
|
PN 06402 For use with all Superwinch 12 Volt Power Drives
|
|
06402
|
Fits Superwinch Power Drives
Contains:
• Wireless Control Unit
• Two Remote Transmitters
• Hardware Kit
• Mounting Template
|
|
|
|
